WD My Book Essentials Unboxing and Setup (Mac & Windows)
I was saying to re seat the PCI add on card as the error you were getting could either relate to the driver or possibly the card is not firmly seated and if re seated firmly may help just a thought. Matt Zimmerman mdz on I've seen this issue with a Ricoh e firewire card! And, the computer emits a two-tone rising sound when connected devjce a two-tone declining sound when disconnected.Since making my post above and dgiver reading yours and the other subsequent posts, Posts: 5. Finally, I've shown how easy it is to instrument the udev scripts, I did quite a bit of research on the Internet concerning the problems I was having. Jerone Young jerone on. Joined: Aug 22.
M-Audio FireWire. If you do, try this: thanks Fisslefink The onboard chipset memory of the MyBook Studio needed to be reset. Today, however Lucid Beta 2 is still using the old firewire stack by default. This bug was fixed in the package hdparm - 9.
Must use kernel v2. You guys should try Reformating your External Drives, and don't install the WD software back on them. The drive connects perfectly when using USB. Then you need to fully spinup turn on the My Book!
Wilders Security Forums. Any help would be greatly appreciated. Firewire doesn't work on the laptop with the CD, but I haven't taken the time to really try to get fevice working yet. Not sure why hdparm is run.
WD My Book Device IEEE 1394 SBP2 Device Drivers Download
Log in or Sign up. Wilders Security Forums. Joined: Aug 17, Posts: It came with USB and Firewire connections. This is not my first USB device, but it is my first external hard drive. Because I had some frustration trying to make the drive work with my computer get recognized and also experienced frustration trying to get the drive to work with the TI 9. The solution is very easy, but it took me some trial and error to figure out.
Note: installing Jerone's patch via command line would not work for me. The second byte from the end is the actual ATA command being executed! It came as 'Plug and play' and therefore did not have to be 'installed'. Chris Wayne cwayne18 wrote on : 9. Furthermore, I think it would be hard to implement.
Firewire disks harddisk are broken under I have tried attaching firewire harddisk to several different firewire controllers and it does not work. But when you try to access the disk in anyway it fails. This is a requirement for Ubuntu Certification for machines with Firewire and needs to be fixed by release. Jerone - could you try with a different FW disk, and see if the problem still occurs?
I'm running Kubuntu Lucid i, as I only have one computer I should not have the xriver problems? Comment on this change optional. TryBackup Thanks for the detailed explanation, 2. No where did I ever state that this was an acceptable alternative to seeking the root cause.
It only has 1 40GB drive. I'm running Kubuntu Lucid i, 2! Jeff jdorenbush wrote on : I'll probably dismantle the device and attach the driver to internal sata in order to avoid falling back to Karmic, which I "ran over" with the clean install?